Journal of the Technical Association
of Refractories,
Vol.21
No.3 Contents
Point of View
Limited vs. Infinite Refractory
Resources
Tsugio Yamato 130
Papers
The Thermal Properites of MgO-C Bricks by Stepwise Heating
Method
Yoshitoshi Saito, Koji Kono and
Tsuneo Kayama
131
Mechanism of Formation of Mixed Oxide /
Metal Phase (“Obake”) in the Al-Si-O System
Hiroshi Abe 141
Reports
The
Effect of Ambient Temperature Conditions on the Placing Properties of
Deflocculated Refractory Castables
Cristpher Parr, Benoit Valdelievre
and Akihiko Namba 148
Improving the Corrosion Resistance of
Alumina-Spinel Castables by
Spinel Additions
Michifumi Nakashima, Toshihiro Isobe, Shoichi Itose, Atsuhiko Touno and Isamu Shimizu 155
Quantitative Simulation of
Cracks Generated in Slide Gate Valve Plates
Michinori Yoshikawa, Shigeki Uchida and Osamu Nomura 162
Development of Magnesia-Spinel Bricks with High Resistivity against Alkali Salts in Rotary Cement
Kilns
Hideo Komatsu, Masashi Arai
and Shigeru Ukawa 166
Comparison of the
Characteristics of MgO-C Brick Formed by Different
Pressing Methods
Takafumi Harada, Osamu Matsuura, Mineo Ichida and Hirokuni Takahashi
172
Unfired Alumina-Silica Brick with
Improved Structural Spalling Resistance by Adding
Roseki
Shotaro Watanabe, Hideo Komatsu and Masashi Arai 177
Coffee Break
Tea Ceremony
Yukari
Kinjo 185
Abstracts
Information about Compilation of Abstracts of the
14th Annual Colloquium of TARJ 186
Improvement of
Alumina-Spinel Castable for
Steel Ladles
Atsuhisa Iida, Eizo Maeda and
Seijiro Tanaka 187
Effect of Various Admixtures on the
Thermo-Mechanical Properties of Low Cement Castable
Ryusuke Funakoshi, Nobuyuki Takahashi and Makoto
Ishikawa
188
Effect of Particle Size Distribution of
Binary Powder Mixtures on Slurry Viscosity
Masanobu
Saito, Kiyoshi Yoshida, Kenichi Sorimachi and Toshiaki
Fukuda 189
Mechanism of Crack Formation in
Alumina-Based Castable Refractories
Junichiro Mori, Masanobu Saito and Kenichi Sorimachi
190
Comparison of the Adhesive
Characteristics of Pitch
Naoya Sato, Kazuhiko Takeuchi, Shigeyuki Takanaga and Hirokuni
Takahashi
191
Performance of Alumina-Chrome
Bricks in Industrial Waste Processing Kilns
Sachihiro Irie, Masanori Ogata,
Koichi Mori and Kenichi Matsubara
192
Effect if SiC Raw Material Properties on Flowability and Packing Density of SiC Castable Refractories
Junichi Haraguchi, Kisabnuro Ariyoshi and Hiroshi Nagata 193
High Temperature Corrosion of Silicon
Carbide by Incineration Residue
Kazuo Ohta, Toshihiro Suzuki, Seiichi Fukuoka and Isao Imai 194
Al2O3-Cr2O3 Refractories for Municipal Waste Incineration Residue
Melting Furnaces
Manabu Ohara, tomohiro Ojima and Yasuo Goto
195
Characteristics of
Al2O3-Cr2O3-ZrO2 Bricks for Waste Melting
Kilns
Yoshiki Tsuchiya, Katsuhisa
Mizuno, Yoshiharu Kajita, Fumihiko Haneda and Toru
Honda 196
Development
of a Cr2O3-Free Castable for Waste Melting Furnaces (Part
2)
Satoshi Sakamoto and Yoshimasa Miyagishi 197
Iron Oxide Resistance of Alumina-Spinel Castable
Toyoyasu Obana, Koichi Nishik, Kazuyuki Sugiyama and Keisuke Asano 198
Shotcrete
Material for Repairing Hot Metal Pretreatment Vessels
Kiyoyuki Komatsubara, Ryosuke Nakamura, Hisaki Sumimura and Makoto Namba 199
Improvement of the Service Life of an
Alumina-Silica Castable for Tundishes (Part 2)
Satoi Kanatani, Eizo Maeda and Seijiro Tanaka 200
Improvement of
Desulfurizing Refractories
Shinji Ishiura, Shigeru Mino, Kazuo Okita, Yoshinori Katsube and
Masanori Tahara 201
Corrosion
Resistance of Alumina-Magnesia Castable
Motoki Hayashi, Eiji Hosoi and Katsuhiko Maeda 202
Development of Castables for
Roof of Ash Melting Furnace
Hirohito Takeuchi, Ryosuke Nakamura, Toshihiko Kaneshige and Hisaharu Sasaki 203
Direct Observation of Molten
Steel Penetration into Porous Refractories
Taishi Matsushita, Kusuhiro Mukai, Tatsuya Ouchi, Isao Sasaka and Jyouki Yhoshitomi
204
Hydration of Crystallized Electrically Fused Magnesia Grains in Room Atmosphere for Four
Years
Youichi Takamiya 205
Development of a New Expansion Measuring
Apparatus
Masahiro Okazaki, Hideo Asakura, Hiroshi Minamizono and Masayuki Nakatsukasa
206
Consideration of Boron Nitride
Composites for Refractories – Study of
Al2O3-C-BN-AlON- and Al2O3-C-BN-SiC Composites
–
Goji Saeki and Keisuke Hiragushi
207
The Title of
TiO2 Addition on the Properties of a Cr2O3-ZrO2
Composite
Shinichirou Otani, Shinobu Hashimoto and Akira Yamaguchi 208
Corrosion of Magnesia Refractory
Brick by a Calcium-Aluminum-Silica Melt
Tsuyoshi Matsui
and Keisuke Hiragushi 209
Application of Fracture Strength
to Refractories
Koji Enomoto, Hiroshi Ohtsuka and Etsuhiro Hasebe 210
The Effect of Alumina Additions
to Spinel Brick on Coating Adherence in Rotary Cement
Kilns
Takao Takeda, Kazunari Imai and Kazushi Tokunaga 211
Relation between Burning Wastes in
Cement Kilns and Coating Adherence on Basic Bricks
Fumihito Ozeki, Terue Murase, Yoshio Mizuno,
Yoshiharu Kajita and Toru Honda 212
Formation of
Magnesium Aluminate Spinel-Carbon Composite Aggregate
Faghihi Sani M. A. and Akira
Yamaguchi
213
Development of a Gas Holder System for Steel
Ladles
Satoshi Nakakita, Hiroaki Egashira, Zyunya Kondo, Keizo Aramaki and Tsuyoshi
Yoshida 214
Relationship between MgO Aggregate Purity and Properties of MgO-C Brick after Firing in a Reducing
Atmosphere
Masato Takana, Akiyoshi Maekawa, Toshiyuki Hokii, Keisuke
Asano and Kenji Ohtsuka 215
Effect of Boron-Containing additives on Magnesia-Carbon
Bricks
Takefumi Imaeda,
Kunihiro Koide, Shigeru Morimoto and Yasuta Koike
216
Corrosion of
MgO-C Bricks by Low Basicity
Slag
Satoshi Akai, Kenji Anan,
Shigeyuki Takanaga and Hiroyuki Takahashi 217
Development of a Low Thermal Conductivity MgO-C Brick
Yoshitoshi Saito, Koji Kono,
Kiyoto Kasai, Yukihiro Nakamura, Kiyoshi Sawano, Kimihiko Takeuchi, Masao Tanaka and
Akiyoshi Maekawa 218
Effect of Fused Silica on the
Permeability of Slit-Type Submerged Entry Nozzle
Zhongda Yu, Jyouki Yoshitomi and
Keisuke Asano
219
Investigation of High Pressure
Impregnation of Slide Gate Plate with Thermosetting
Resin
Kazuo Itoh, Koji Kawarada and Etsuhiro Hasebe 220
Cause of Edge Peeling around the
Nozzle Pore of an SN Plate and Its Prevention
Keiichiro
Akamine, Arito Mizobe, Tomoharu Shimokasa, Isao Sasaka, Jyouki Yoshitomi and Keisuke Asano 221
Influence of a Newly Developed Mold Powder on the Life of
Casting Nozzle
Hiroyuki Yamaji, Yukimasa Iwamoto, Tomoaki Omoto
and Akihiro Morita
222
Development of Spinel-G Materials for Immersion
Nozzles
Tsuyoshi Yoshida, Shigeaki Takahashi, Mitsunori
Hata and Kazuhide
Uchida 223
Development of High Strength
Slide Gate Plate
Hiroaki Akagi, Osamu Nomura, Masanori Ogata and Shinji Adachi 224
Development of Porous Material
for Gas Purging Plugs
Tatsuya Ouchi, Isao Sasaka, Jyouki Yoshitomi, Keisuke Asano, Shuichi Hara, Manabu Kimura
and Tetsuo Tsuzuki
225